Tutorial

Hda Set_geometry_intr Status 0x51 Driveready Seekcomplete Error

RECOMMENDED: If you have Windows errors then we strongly recommend that you download and run this (Windows) Repair Tool.

hda: set_multmode: status=0x51 { DriveReady SeekComplete Error } + hda: set_multmode: error=0x04 { DriveStatusError } + +. If in doubt, say N. + Not sure if that will help though as the error messages I;'ve been seeing are different

What mean this message at boot time? hda: task_no_data_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_no_data_intr: error=0x04 { DriveStatusError } 2.4.20, Pentium 1, Intel HX chipset.

Jan 26 01:03:58 kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Jan 26 01:03:58 kernel: hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=7361507, sector=890144 Jan 26 01:03:58 kernel: end_request:.

ide: failed opcode was: unknown hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x84 { DriveStatusError BadCRC That works to set the mode. I'll have to try if for a while to see if the errors occur again. It's just a bit sucky because it slows the disk down quite a bit – I discovered.

hda: read_intr: status=0x51 { DriveReady SeekComplete Error }. EXT3-fs error (device ide0(3,2)): ext3_get_inode_loc: unable to read inode block.

dma_intr: error=0x84 { DriveStatusError BadCRC } <4>hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } <4>hda: dma_intr: error=0x84 1) What do the dma_intr messages mean? Does my HDD go to the junk heap, or is it possible for me to continue working with it? I have had no.

Error End Spyware Traffic, Displays an entry for the start and end of each session. The Type column indicates the type of threat, such as “virus” or “spyware. an Operator ( such as has or in ), enclose the string in quotation marks to avoid a syntax error. Spyware is software that aims to gather information about a

status=0x51 { DriveReady SeekComplete Error } – PIO modes: mode3 mode4 UDMA modes: mode0 mode1 mode2 message log from reset: Feb 5 17:31:24 localhost kernel: hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } Feb 5 17:31:24 localhost kernel: hda: dma_intr:.

hda: dma_intr: status=0x51 { DriveReady SeekComplete Error } hda: dma_intr: error=0x40 { UncorrectableError }, LBAsect=5790465, sector=5593904 end_request: I/O error, dev 03:02 (hda), sector 5593904 hda: dma_intr: status.

task_in_intr: status=0x51 { DriveReady SeekComplete Error } hda: task_in_intr: error=0x10 { SectorIdNotFound }, LBAsect=156296132, sector=156296132 ide: failed opcode was I really hope it's not the drive. I'm also confused as to why sfdisk is giving me errors about drive geometry.

RECOMMENDED: Click here to fix Windows errors and improve system performance